Pressure washer accessory set

Nilfisk compact aluminium pump complete for high pressure washer 31000520

• Verified original product
• Contents: pump including 4 socket-head screws and microswitch
• To replace the pump, unscrew the 6 cross-head screws at the back of the machine. Then take out the pump as a whole. Turn the pump upside down with the socket screws up. Be careful, there is oil in the housing. Remove the microswitch from the pump and unscrew the socket-head screws. Replace the pump and reassemble it. Press the microswitch on the pump and put the pump back in its housing

Karcher rear holder with connection set of 3 pressure washer 90024370, 9.002-437.0

• Verified original product
• The corresponding connection set with item number 9.013-355.0 is also available
• Contents: high pressure outlet (9.038-457.0), hose hook (9.038-459.0) and mounting clamp

Kärcher piston of steering head (cylinder head) complete for high pressure washer 90019270, 9.001-927.0

• Verified original product
• Includes: spring and lock ring

Kärcher side brushes sweeper 28849710, 2.884-971.0

• Verified original product
• Measurements: 265 x 265 x 30 mm
• Including: screws

Kärcher piston complete incl. spring for high pressure washer 90025220, 9.002-522.0

• Verified original product
• Position: by cylinder head

Nilfisk carbon brush in holder 6,4x9,9mm set of 2 for high pressure washer 31000832

• Verified original product
• Contents: 2 carbon brushes in holder
• To replace the carbon brushes, remove the back cover from the blue hood by removing the six screws. Then remove the black housing from the motor and carefully remove the white cap from the motor. The carbon brushes are now visible. The cable lug is secured with a protection strip. Push it in and remove the cable lug

Nilfisk Click & Clean Car Set for High Pressure Cleaner 128500956

• Verified original product

Nilfisk valve set of 6 valves for high pressure washer 127440083

• Verified original product
• Contents: 3 low-pressure and 3 high-pressure valves and corresponding o-rings
• The o-rings should first be lubricated with Vaseline before placement
• Valve seat diameter on white plastic part: 10,71 mm

Nilfisk knee piece (tube) for high-pressure sprayer G5 high pressure washer 126481103

• Verified original product
• Replace the old tube by removing the U-clip and removing it from the centre tube
• Suitable for: E 145.3-10 X-TRA, E 150.1-10 X-TRA, P 150.2-10 serie and P 160.2 serie

Nilfisk carbon brush in holder 6,5x11,4mm set of 2 for high pressure washer 31000833

• Verified original product
• Contents: 2 carbon brushes in holder
• To replace the carbon brushes, remove the back cover from the blue hood by removing the six screws. Then remove the black housing from the motor and carefully remove the white cap from the motor. The carbon brushes are now visible. The cable lug is secured with a protection strip. Push it in and remove the cable lug

Kärcher spring (coil spring) for high pressure washer 53322580, 5.332-258.0

• Verified original product

Kärcher repair kit nipple and piston for high pressure washer 97552700, 9.755-270.0

• Verified original product
• The nipple is of the detergent dosage and the piston of the pressure regulator

Nilfisk valve set of 6 valves for high pressure washer 127500036

• Verified original product
• Contents: 3 low-pressure and 3 high-pressure valves

Kärcher Multifunctional Spray Gun Plus Set for pressure washer 2.645-290.0

Fits in BP 1 Barrel ...

• Ergonomische handgreep
• Eenvoudige vergrendeling met één vinger
• Universele koppelingen (1/2", 5/8", 3/4")
• Slicksysteem

3-way connectior for pressure washer 2.645-009.0

• Verified original product

Device connection G 1/2 for pressure washer 2.645-098.0

• Verified original product

Kärcher Water Distributor two-way Basic for pressure washer 2.645-199.0

• Verified original product

Nilfisk valve set of 6 valves incl. o-rings for high pressure washer 126486773

• Verified original product
• Contents: 3 low-pressure and 3 high-pressure valves and corresponding o-rings

Kärcher piston of steering head (cylinder head) complete for high pressure washer 28853980, 2.885-398.0

• Verified original product
• Includes: spring and lock ring

Kärcher ball 7mm for high pressure washer 74019080, 7.401-908.0

• Verified original product
• Dimensions: 7mm