Nilfisk Pressure washer cylinder head
-
Nilfisk injector complete for high pressure washer 6526253
• Verified original product
• Suitable for: E 130.1 serie, E 140.1 serie and older models of the E 125, E 135 and E 145 series• Verified original product
• Suitable for: E 130.1 serie, E 140.1 serie and older models of the E 125, E 135 and E 145 series• Verified original productLearn More
• Suitable for: E 130.1 serie, E 140.1 serie and older models of the E 125, E 135 and E 145 series£11.99In stock- Delivery within 2-3 working days Only valid if in stock and on working days!
- check_circle Order before 6.00 PM, dispatched today
- check_circle 30 day return
Nilfisk seal kit (seal set) bypass for high pressure washer 126486780
• Verified original product
• Contents: ball, spring, plastic plate and metal holder
• If any oil has leaked out, top it up to about 1 cm below the edge so that the tilting disc is just under oil
• The plate with cross can be found in the cylinder block. The spring with the broad side facing the metal plate is placed on top of this. The ball lies on the spring and the white plate sits with the round hole towards the ball• Verified original product
• Contents: ball, spring, plastic plate and metal holder
• If any oil has leaked out, top it up to about 1 cm below ...• Verified original productLearn More
• Contents: ball, spring, plastic plate and metal holder
• If any oil has leaked out, top it up to about 1 cm below the edge so that the tilting disc is just under oil
• The plate with cross can be found in the cy...£7.99In stock- Delivery within 2-3 working days Only valid if in stock and on working days!
Nilfisk check valve (non-return valve) for high pressure washer 127440082
• Verified original product
• To replace the non-return valve, place the machine on the engine with the 4 socket-head screws up and loosen them. Keep in mind that there is oil in the housing. It is necessary to separate the cylinder head and oil housing. Now replace the non-return valve and screw everything tight
• Should any oil have leaked out, top it up to about 4 mm below the rim so that the bearing is just under oil• Verified original product
• To replace the non-return valve, place the machine on the engine with the 4 socket-head screws up and loosen them. Ke...• Verified original productLearn More
• To replace the non-return valve, place the machine on the engine with the 4 socket-head screws up and loosen them. Keep in mind that there is oil in the housing. It is necessary to separate the cylinder head and oil h...£9.99In stock- Delivery within 2-3 working days Only valid if in stock and on working days!
Can't find what you're looking for?
We have over 10 million products available.
Place a request online now. We will contact our suppliers
and get back to you as soon as possible.