Zanussi Cooker Hood spare parts & accessories

• Alternative product
• Dimensions: 506 x 300 mm
• With one-sided release
• This filter can be easily snapped into place
• Grease filters are used to absorb grease residues and moisture from the air in your kitchen and to prevent your walls from being affected by the grease

• Verified original product
• Dimensions: 392 x 202 mm.

• Verified original product
• Dimensions: 342 x 285 mm
• If you are unable to clean the filter, you can place it with the greasy side facing down in an empty dishwasher. Clean the filter at max. 50°C
• Placing the filter in the dishwasher may cause discoloration
• The filter may be packaged in blue foil. This foil must be removed before use!

• Verified original product
• Dimensions: 372 x 112 x 73 mm
• Replacement of type 60 carbon filter
• The filter should be replaced every 3 to 4 months

• Alternative product
• Dimensions: 370 x 115 x 75 mm
• Type: 60
• Packaging may vary

• Verified original product
• Dimensions: 305 x 267 mm

• Verified original product
• Type: B210
• Diameter Ø: 21 cm
• Height: 3.5 cm
• Shape: Circular

• Verified original product
• Diameter Ø: 17.3 cm
• Height: 3.5 cm
• Shape: Circular

• Verified original product
• LED spotlight complete with cable.
• The edge is no longer silver nowadays
• Built-in dimensions: 50 x 50 mm

• Verified original product
• Dimensions: 173 x 77 x 24 mm

• Verified original product

• Verified original product
• Including: mounting material

• Verified original product
• Type: EFF72
• Dimensions: 26.7 x 23.7 x 1.6 cm
• Shape: Rectangular

• Verified original product

• Verified original product
• Filter holder hinge
• Can be used on both the left and right.
• For use on the left, the pin must be removed. This is easy to do.

• High quality alternative product
• Contents: 2 pieces
• Dimensions: 22.5 x 15 cm
• Shape: Rectangular

• High quality alternative product
• Dimensions: 205 x 43 x 213 mm
• Type 303
• We recommend replacing the filter every 3 to 4 months

• Verified original product
• Water tank lock
• Locking the condensation water tank.

• High quality alternative product
• Type: 210
• Dimensions: 210 x 31 mm
• Content: 1 piece

• Verified original product

• Verified original product
• Dimensions: 368 x 59 mm
• Transparent

• Verified original product
• Contents: 2 pieces
• Diameter: 155 mm
• Height: 16 mm
• Depending on use, the filter should be replaced every 6 months

• Verified original product
• Contents: 2 pieces
• Diameter: 125 mm
• Depending on use, the filter should be replaced every 6 months

• Verified original product
• Dimensions: 240 x 193 x 10 mm
• The carbon filter absorbs up to 45% of the odors and is fireproof and non-toxic
• We advise you to replace the filter every 3 to 4 months

• Verified original product
• Contents: 2 pieces
• Type: 58
• Diameter Ø: 14.2 cm
• Height: 4.8 cm
• Shape: Circular

• Verified Original product
• Dimensions: 303 x 77 x 23 mm (length x width x height)
• Colour: transparent
• Material: plastic

• Verified original product
• Contents: 2 pieces
• Diameter Ø: 21 cm
• Height: 3 cm
• Shape: Circular

• Alternative product
• Dimensions: 100x54mm

• Verified original product
• Filter holder.

• Alternative product
• Dimensions: 125 x 41 mm
• Type: Blower
• Also suitable for: Progress PDP6020E
• Content: 2 pieces
• The filter should be replaced every 3 to 4 months
• Packaging may vary

• Verified original product
• Cover Cover cap left.

• Verified original product
• Dimensions: 212 x 205 x 42 mm
• Also known as: NYTTIG FIL 558

• Alternative product
• Dimensions: circulaire ⌀ 20cm

• Verified original product
• Dimensions: 515 x 185 mm
• Shape: Rectangular

• Verified original product
• Contents: 2 pieces
• Diameter: 126 mm
• Depending on use, the filter should be replaced every 6 months