Matura Washing Machine Parts and Accessories
Categories
-
Add to basket
Universal intermediate frame (insert, stacking kit, connector) incl. drawer for washer and dryer 60300600 60300600• Universal product
• Includes: tray
• Dimensions: 620 x 530 x 70 mm
• Deluxe edition£49.99 MaturaIn stock -
Add to basket
Shock absorber for Miele washing machine 4500826 4500826, W106-146-300-700-800-900• High quality alternative product
• 6 months warranty
• Imprint: 120N
• Dimensions pushed in: 174 mm center to center
• Dimensions pulled out: 247 mm center to center£21.99 MaturaIn stock -
Add to basket
Shock absorbers (dampers) for a.o. Miele Novotronic, W2521 8mm ANS 120N washing machine 4500826 4500826, W106-146-300-700-800-900• High quality alternative product
• Contents: 2 shock absorbers
• Imprint: 120N
• Length: 190 mm to 285mm
• Can be used up to 1400 rpm£12.49 MaturaIn stock -
Add to basket
WPRO Limescale, dirt & grease remover DES121 for all washing machines & dishwashers 484000008801 484000008801, Washing machines and Dishwashers• Reduces limescale, cleans grease & removes bad odours
£17.49 MaturaIn stock -
Add to basket
Universal carbon brushes (carbon brush, carbon brushes) in holder set of 2 pieces washing machine 4006020152 4006020152, 74530• Universal product
• Dimensions: 88 x 34 x 23 mm
• Content: set of 2 carbon brushes in holder
• Make sure that when you place the carbon brush that the carbon brush is in the holder so that it cannot break. If there is no locking pin for it, use a piece of adhesive tape to lock the carbon brush. Remove the pin and / or adhesive tape after placing the holder£16.49 MaturaIn stock -
Add to basket
Carbon brushes (carbon brush set, carbon brush) in holder 2 pieces for a.o. Bauknecht washing machine 481236248004 481236248004, WA 9430-9650-9882-Allure• Equivalent to original product
• Contents: set of 2 carbon brushes in holder with side piece
• Dimensions: 35 x 100 x 35 mm
• CESET motor MCA38-52/64£21.99 MaturaIn stock -
Add to basket
Supply hose 2,5 meter) for a.o. AEG, Electrolux washing machine E2WIS250A 9029793412 9029793412, Straight/square, 90 Degree, 60 Bar• Equivalent to original product
• supply 2,5 meter, incl water lock£21.99 MaturaIn stock -
Add to basket
Door lock for washing machine 3792030425 3792030425, Lavamat 72537-72738• Equivalent to original product
• Model in hook form
• 4 connection points
• Possible imprint: Bitron DL-S1, 124967513, 124967514
• Dimensions: 103 x 75 x 20 mm (Length x width x height)£21.99 MaturaIn stock -
Add to basket
Bearing (6306 2RS1 30x72x19) for washing machine 63062RS 63062RS• Alternative product
• Bearing number: 6306 2RS1
• Measurements: 30 x 72 x 19 mm£33.49 MaturaIn stock -
Add to basket
Bearing (6306 ZZ 30x72x19) for washing machine 6306ZZ 6306ZZ• Alternative product
• Bearing number: 6306 zz
• Measurements: 30 x 72 x 19 mm£12.49 MaturaIn stock -
Add to basket
Carbon Brush (Sole motor 1243098) for a.o. AEG, Electrolux washing machine 4006020152 4006020152, 74 530• Verified original product
• Quantity: 2 pieces
• Dimensions: 54x34x23 mm£21.49 MaturaIn stock -
Add to basket
Carbon brushes (carbon brush, carbon brush set) in holder with side piece for a.o. Bauknecht washing machine 481236248004 481236248004, WA 9430-9650-9882-Allure• Alternative product
• Dimensions: 35 x 100 x 35 mm
• Content: set of 2 carbon brushes in holder
• Make sure that when you place the carbon brush that the carbon brush is in the holder so that it cannot break. If there is no locking pin for it, use a piece of adhesive tape to lock the carbon brush. Remove the pin and / or adhesive tape after placing the holder£12.99 MaturaIn stock -
Add to basket
Universal capacitor 10uF washing machine• Universal product
• Dimensions: 80 x 33 x 33 mm£8.99 MaturaIn stock -
Add to basket
Poly-V belt for Washing Machine 660579 660579, 00660579, WAS24440, WAS28441• Verified original product
• 1189 J5 TEM
• Size: 1189 x 3 x 13 mm£13.99 MaturaIn stock -
Add to basket
Bearing (6206 ZZ 30x62x16) for washing machine 86534825 LA82196• Alternative product
• Bearing number: 6206 zz
• Measurements: 30 x 62 x16 mm£20.99 MaturaIn stock -
Add to basket
Poly-V-Belt (1956 H7) 1956H7 2962470100, DCU7330, DPU8306• Alternative product
• 1956 H7£13.99 MaturaIn stock -
Add to basket
Bearing (ball bearing, drum bearing, tub bearing) 6205ZZ for a.o. Whirlpool washing machine 50269558008 6205ZZ• Alternative product
• Bearing number: 6205 zz
• Measurements: 25 x 52 x 15 mm£6.49 MaturaIn stock -
Add to basket
Hose (supply 2,5 meter, met water lock) for washing machine E2WIS250A 9029793412 9029793412, Straight / angled, 90 Degrees, 60 Bar• Verified original product
• supply 2,5 meter, met water lock£34.99 MaturaIn stock -
Add to basket
Hose (2,5 meter - with water lock -) for washing machine TAF257-481953028926 C00862492, 2.5 meters• Alternative product
• 2,5 meter - with water lock -£40.99 MaturaIn stock -
Add to basket
PowerPro Descaler For dishwasher and washing machine 484000008416, DES103 484000008416, Dishwashers• Verified original product
• This descaler removes limescale deposits in your appliance and improves performance, extending the life of your washing machine and dishwasher
• 1 bottle = single use (250 gr)£6.99 MaturaIn stock -
Add to basket
Carbon brush set for washing machine 4006020327 4006020327, Holder = 56mm clamp = 5mm• Verified original product
• Quantity: 2x pieces
• Dimensions: 97 x 38 x 24 mm£21.99 MaturaIn stock -
Add to basket
WPRO inlet hose (water supply hose) incl. water stop (aquastop) washing machine 484000008793 484000008793, 3.5 meters• Verified original product
• Length: 4 metres
• Connections: diameter 20/27 mm, female/female, straight/angled
• Maximum pressure: 10 bar
• Including: seal and microfilter£13.49 MaturaIn stock -
Add to basket
Hose (drain 2,5 mtr complete) for washing machine 9029793370 9029793370, Classic 19x21 -wit-• Alternative product
• drain 2,5 mtr complete£8.99 MaturaIn stock -
Add to basket
Inlet Valve (Triple) for washing machine 4071360194 4071360194, lavamat 72 738,• Alternative product
• Exclusive: rubbers£31.49 MaturaIn stock -
Add to basket
Door seal Washing machine suitable for AEG, Electrolux ø 370 mm With flap 1108590421, Lavamat 72330• Equivalent to original product
• 6 months warranty
• Diameter: ø 370 mm
• With flap: Yes
• With spout: No£43.49 MaturaIn stock -
Add to basket
Carbon Brush (in holder) for washing machine 4006020343 4006020343, Holder = 46mm clamp = 5mm• Verified original product
• in holder£21.99 MaturaIn stock -
Add to basket
Bearing (6207 ZZ 35x72x17) for washing machine 6207ZZ 6207ZZ• Alternative product
• Bearing number: 6207 zz
• Measurements: 35 x 72 x 17 mm£27.49 MaturaIn stock -
Add to basket
Rubber Seal (For filter) for a.o. Zanussi washing machine 1260616014 1260616014, ZWG3104, ZWG3106, FA1023• Verified original product
• For filter£8.99 MaturaIn stock -
Add to basket
Shock absorber (damper) 13mm excl. white bushing for a.o. AEG, Electrolux washing machine 1322553015 1322553015, Classic 5110-5120-WA 1000• Equivalent to original product
• 13mm
• Excluding: white bushing£13.99 MaturaIn stock -
Add to basket
Capacitor (12.5 uF) for washing machine AV0806 AV0806• Alternative product
• 12.5£8.99 MaturaIn stock -
Add to basket
Plug (shock absorber) for washing machine 1327804017 1327804017, Rubino, Zaffiro, FJI1296,• Verified original product
• shock absorber£6.49 MaturaIn stock -
Add to basket
Bearing (6206 2RS1 30x62x16) for washing machine 62062RS LA82198• Alternative product
• Bearing number: 6206 2RS1
• Measurements: 30 x 62 x 16 mm£21.49 MaturaIn stock -
Add to basket
Bearing Seal (35 x 62 x 10/12.5) for washing machine 1249685007 1249685007, Lavamat 72620• Verified original product
• Dimensions: 35 x 62 x 10/12,5
• Outer diameter bearing seal: 62 mm
• Inner diameter bearing seal: 35 mm£12.49 MaturaIn stock -
Add to basket
Heating Element (1950W with NTC) for washing machine 1325347001 1325347001, LAV84820, LAV64608• Alternative product
• 1950W with NTC£17.49 MaturaIn stock -
Add to basket
Bearing Seal (40.2 x 72 x 11/14) for washing machine 1249667013 8581249667016, Lavamat 84730W, Zaffiro• Verified original product
• Dimensions: 40,2 x 72 x 11/14
• Outer diameter bearing seal: 72 mm
• Inner diameter bearing seal: 40,2 mm£15.49 MaturaIn stock -
Add to basket
WPRO Universal Intermediate frame (intermediate piece, stacking kit, connecting piece) with drawer for washing machine and dryer 484000008545 484000008545, universal stacking• Verified original product
• Including: removable drawer
• For 60cm wide devices
• Because you can extend the drawer, you save space since you can place the laundry basket on it£72.99 MaturaDelivery time: 9 days
Can't find what you're looking for?
We can supply over 10,000,000 parts.
Submit your request online. We'll search our suppliers for the part and get back to you as soon as possible.
